|
Stone Restoration
Forum
Ask Stone Restoration Professionals
Story of Marble
Marble a Decorative Choice
Beauty Of Marble Flooring
About Marble Tiles
Installing Marble Tile
Marble for Kitchen
Kitchen Island Design
Choosing Countertop
Countertops For Kitchen
Materials For Kitchen
Countertop
Stain Proofing
Maintenance of Marble
Tips For Marble Cleaning
Bathroom Vanities
Marble Mosaic Tables
Marble vs Hardwood Floors
Investment In Marble
Marble On A Budget
Expensive Marble
Granite:
Care of Granite
Care Of Granite Countertops
How To Choose a Granite
Polishing Granite
Miscellaneous:
FAQ About Stone
Purpose of Natural Stones
Quality of Natural Stones
What Produces Shine
Entryways & Medallion
Choosing Fireplace
Shop For Fireplaces
Terrazzo Cleaning Tips
Vintage Marble Tiles
Uses of Onyx Stone
Granite for House Signs
|
Stone Carving Tips: Selecting The Right Stone
I have run my own stone and marble workshop for over twenty
five years and it became a regular occurrence to have visitors looking
to buy a piece of stone or marble to try out stone carving. I have a
soft spot for all wanna be artists so I would never charge for the stone,
asking instead that they bring back their piece of work so that I could
see how they got on.
In all those years no-one ever came back!
Now I know that most people are really decent and would have
come back to show me their efforts, so I have put this lack of response
down to the fact that most of these novice carvers simply chose the
wrong type of materials to start with and therefore never actually managed
to finish the piece of work.
Most of the hopefuls I saw over the years wanted to carve marble
and so, in spite of my advice to try a softer stone, they trolled off
happily with a nice piece of white Carrara or Italian Botticino Fiorito
never to be seen again. (by me anyway!)
The simple fact is that stone and especially marble carving is
hard work. Unless you choose a soft and relatively easy to work type
of stone to start with and you select the right tools, you will easily
become discouraged and give up long before you are able to develop the
practical skills necessary to work the harder stones and marble.
To help would be stone carvers choose the right type of stone,
I have tried to create a kind of Mohs Scale of hardness of the kinds
of stone that you are likely to find in your local stone yards.
This is not a scientific scale, it is based not only on hardness but
also on the practical workability of the stone. I have assumed that
you will be working with hand tools not power tools.
The scale is numbered 1-10. 1 being the softest stone and 10 being the
hardest.
1: Cotswold Stone.
Tools: Hardened steel chisels with wooden handles similar to
wood chisels used with a Wooden mallet. Steel chisels with steel bulb
end, for use with lead mallet or “dummy”. Can be sawn with a hand saw
just like a timber saw.
Advantages: Very soft to work. all types of chisel will work. Can be
cut to size with a hand saw, excellent for practicing hammer and chisel
technique.
Disadvantages: : Finished carvings will have poorly defined detail,
the stone is too coarse to give a sharp finish. Risk of exposing hard
shell in the course of work this may spoil the look of the finished
job. Too weak to easily make thin panel carvings for example house signs
or decorative plaques.
Conclusion: : May be the right material for larger sculptural pieces.
2: Bath Stone.
Tools: Hardened steel chisels with wooden handles similar to
wood chisels. Wooden mallet. Steel chisels with steel bulb end, for
use with lead mallet or “dummy”.
Can be sawn with a hand saw just like a timber saw.
Advantages: : Soft to work. all types of chisel will work. Can
be cut to size with a hand saw, excellent for practicing hammer and
chisel technique.
Disadvantages: : Risk of exposing hard shell in the course of
work this may spoil the look of the finished job. Too weak to easily
make thin panel carvings for example house signs or decorative plaques.
Conclusion: : Finer grain than Cotswold etc. Better definition
of carving. Good choice for first project.
3: Portland Stone.
Tools: Hardened Steel chisels with steel bulb end, used with
wooden masons mallet. Fine tungsten carvers chisels used with small
steel club hammer.
Advantages: : Memorial grade is a very high quality stone, fine
grained good definition of detail. Strong enough to make thin panel
carvings for example house signs or number plaques.
Disadvantages: : Availability of finer grade material. Some risk
of exposing hard shell in the course of work this may spoil the look
of the finished job.
Conclusion: : Finer grain than Cotswold or Bath stone etc. Better
definition of carving. Good choice for first project but harder to work
than bath stone.
4: Portuguese limestone.
Tools: Hardened Steel chisels used with steel hammer. Fine tungsten
carvers chisels used with small steel club hammer.
Advantages: : High quality stone, fine grained very good definition
of detail. Strong enough to make thin panel carvings, for example
house signs or number plaques.
Readily available from fireplace manufacturers .
Disadvantages: : Not often available in sizes thicker than 30mm.
Conclusion: : Finer grain than any of the previous stones. Better
definition for carving. Good choice for first project but harder to
work than bath stone.
5: Italian Black Slate.
Tools: Fine steel chisels, tungsten carvers chisels used with
small steel club hammer.
Advantages: : Very fine grained very good definition of detail.
Strong enough to make thin panel carvings, for example house signs or
number plaques.
Disadvantages: : Hard to work, will chip easily while carving.
Not for exterior use.
Conclusion: : Good start if you want to carve slate.
6: York Stone.
Tools: Tungsten chisels only, tungsten carvers chisels used with
small steel club hammer.
Advantages: : High quality stone, fine grained very good definition
of detail. Strong enough to make thin panel carvings, for example house
signs or number plaques. Readily available from garden entrees.
Disadvantages: : Very hard to work. steel tools will blunt very
quickly, Dust is hazardous so wear a mask!
Conclusion: : Not a good choice for novice carvers.
7: Welsh Gray Slate.
Tools: Fine steel chisels, tungsten carvers chisels used with
small steel club hammer.
Advantages: : Very fine grained excellent definition of detail.
Strong enough to make thin panel carvings, for example house signs or
number plaques. Very strong. Readily available. Ideal for exterior use.
Disadvantages: : Hard to work, will chip easily while carving.
Conclusion: : Super quality slate but not for novices.
8: Westmoreland or Cumberland Green Slate.
Tools: Tungsten chisels, tungsten carvers chisels used with small
steel club hammer.
Advantages: : Very fine grained excellent definition of detail.
Strong enough to make thin panel carvings, for example house signs or
number plaques. Very strong.
Disadvantages: : Very hard to work, tends to chip easily while
carving. Ideal for exterior use.
Conclusion: : Super quality slate but not for novices.
9: marble.
Tools: Tungsten chisels only, tungsten carvers chisels used with
small steel club hammer.
Advantages: Very fine grained excellent definition of detail.
Strong enough to make thin panel carvings, for example house signs or
number plaques.
Disadvantages: : Very hard to work.
Conclusion: : Try softer materials first, if you must try marble
look for a paper white marble from Turkey, take the advice of your local
mason!
10: Granite.
Tools: Nuclear powered laser cutters only!
Advantages: :Super Hard.
Disadvantages: : Ridiculously hard to work by hand.
Conclusion: :Try bashing your own kneecaps with a hammer, it
will hurt less!
That concludes “Walkers Scale of Hardness”. I have almost certainly
forgotten some stones and as the scale is based on my experiences over
the years other people may have differing opinions. If you are a stonemason
or carver and have a different view, or you have a local stone you think
should be included on the list please contact me and I will consider
editing or adding to this article accordingly.
Steve Walker has been a craftsman in stone and
marble for 40 years. Leaving school at fifteen he entered an apprenticeship
as an ecclesiastical marble mason with an old London firm, and in his
long career have practiced as a stone mason, letter cutter, restoration
carver, marble mason and carver, fireplace designer and manufacturer.He
has worked in old fashioned traditional stone firms and in modern marble
workshops, in almost every type of stone marble and granite. He is now
the sole owner, and craftsman of
StoneEngravings House signs – www.stoneengravings.co.uk
|
Home
About Us
Contact Us
Terms
Resources
|
